How to properly paint Concrete Surfaces

| November 29, 2015

Concrete may seem hard to paint, but this is actually quite easy to do if you follow certain steps. Here is a quick guide through five stages that will help you successfully paint your concrete surface.

 

Stage One: Expectations

3966378486_dd365d20e3_bUnlike, wood, glass and ceramic tiles, concrete is harder to manage and maintain, thus its paintjob takes more time to complete. That is why you should be aware of these things before going into this venture and make sure you do not expect to be done with such a task in a day or two.

Due to concrete’s porosity, the paint will require at least a week to dry, but this period can be extended onto ten days or a full fortnight. However, there is something positive about concrete that many people do not know: you can choose literally any color you want and avoid various shades of grey.

 

Stage Two: Preparation and Cleaning

The chances are that your concrete surface is not completely clean and ready to be repainted. Whether it is your walkway, driveway or a garage floor, there will surely be traces of oil, water, dust and dirt all over the place. Hence, you need to make sure the surface is thoroughly cleaned before starting to apply paint.

 

Stage Three: Getting Rid of the Old Paint

Should you remove previous layers of paint when repainting walls in your home? Some people claim that you should remove it because painting over old paint prevents new paint from sticking to your walls properly, while others believe that you shouldn’t bother as painting over it will have the same end results. If you decide to remove it, you should first use a paint scraper and a wire brush, say reputed Sydney-based painters, and then thoroughly clean the surface one more time.

 

Stage Four: Sealing and Priming

1806439935_1c91b14218_bThis is the last preparatory stage and a very important one as well. In order to perform a good paint job, all cracks and holes need to be taken care of – and almost all concrete surfaces are full of holes and cracks of various shapes and sizes. If you do not fill and seal them, your new paint will peel off quite quickly and your work will be useless.

Repairing holes can be done rather quickly and easily and, once the surface is completely dry, you should also apply an additional layer of primer in order to achieve stronger adhesion and make your paint job more durable. Most people have a tendency to use protective epoxy coating that can be applied to all surfaces regardless of their location, so it is perfect both for indoor and outdoor jobs.

 

Stage Five: Painting

Now, it is finally time for actual painting! There are a number of ways to do so and you can use different types of paint, based on your preferences. Make sure you use quality rollers and brushes and do not forget to apply at least two or three layers of paint in order to get the best results.

Finally, you can choose any color you want and completely transform boring grey concrete surface into a basis for a new and exciting area. In the end, let the paint dry properly and wait for at least a full day before moving back in.

 

Final Outcome

If performed as suggested, this project can be painless and effective – by providing your concrete surfaces a new life, you will, consequently, elevate the quality of your life as well.

Category: Featured Articles

Comments are closed.